PVSG User Guide
11
5. Power
e PVSG is powered by a direct battery connection. e gateway is turned on by applying power to a
power control input or a CAN message depending on conguration.
e PVSG in a 12 V or 24 V system and can operate from 6.5 V up to 32 V with over-voltage protection at
36 V.
e following table provides specications for the PVSG power:
Item Min Nom Max Unit
Input voltage for normal operation 6.5 - 32 V
Maximum continuous voltage - - 36 V
Maximum peak current A
Current draw in sleep mode 285 uA
Recommended External Fuse - - 10 A
To Next Page
Loading...