page 15 of 18
6 Technical Data
Version
Digital pressure gauge with
ACT
-
MIN
and
MAX Display
bar graph display (33 segments) with peak and hold function
4 ½ digit LC display (15 mm) with back light illumination
Battery powered with low power electronic system
Life time cycle 1,500 h (No back light function)
Pressure port stainless steel 1.4404
½” BSPP ISO 1179-2 (pressure port gauge EN837)
Input
Ceramic Sensor Cell (relative -1 . +1 bar/ -1. . 4 bar)
Strain Gauge Cell (relative 0. . 60/ 400 bar)
Scan rate 10 ms
Class: 2,0 (-1. . +1 bar)
1,0 (-1 . 4 /0 . 60/ 0. . 400 bar)
Resolution 12 bit = 4,096 steps
Housing
Ø = 79 mm; T = 33 mm
Zinc Die Cast with Rubber Protection TPE
Weight
540 g
Parts in contact with media
Sensor Cell
Ceramic/ Viton
®
(-1. . +1 bar/-1. .+4 bar)
Stainless Steel 1.4534 (0. .60/0. . 400 bar)
Suitable fluids/media
ATF- and Hydraulic oils, brake fluid, patrol, diesel, water and air
(4 bar) no oxygene
Please use suitable sealings
Power supply
Battery 2 x1,5 VDC (LR6 –AA) Alkaline (Mignon)
Ambient conditions
Operating temperature
Fluid temperature
Storage temperature
Rel. humidity
Protection
Vibration
Shock
Reliability Cycles (10
6
)
-10…+50 °C
-20…+80°C
-20…+60°C
< 85%
EN 60529 (IP 65)
IEC 60068-2-6 5g
IEC 60068-2-27 25g
100
Connect with VAS tester
Via analogue output with connecting cable
To Next Page
Loading...
