Parker SensoControl ServiceJunior - Menu Functions

page 5 of 18
3.2 Menu Functions
Following set ups can be done within the MENU Function:
• Automatic switch off enable/disabled
• Selection of engineering units (bar/mbar/PSI/kPa/MPa)
By pressing the MENU key (2 s) the desired function appears. Skip to next function by pressing
MENU again. Confirmation by pressing the “OK“ key.
The ServiceJunior returns into the display mode.
RESET
OK
RESET
OK
RESET
OK
RESET
OK
RESET
OK
MENU
ZERO
MENU
ZERO
MENU
ZERO
MENU
ZERO
MENU
ZERO