Parker SensoControl ServiceJunior - Connection to the hydraulics

page 6 of 18
4 Connection to the hydraulics
According to the VAS test kits, the ServiceJunior comes with a male ½” BSP pressure gauge port
(hex size = 27 mm). It is made out of stainless steel and will be sealed by an ED sealing ring. In
combination with the recommended sealing type the pressure port is compatible with following fluids/
media:
Fluid/ Media Sealing
Diesel
FKM (Viton
®
)
Gasoline
FKM (Viton
®
)
Breakfluid
EPDM
Hydraulic-Oil
FKM (Viton
®
)
Air (4bar)
FKM (Viton
®
)
Observe specified torques when fitting the ServiceJunior
The hex size of the pressure connection is 27 mm
Pressure port Torque
½”BSPP pressure gauge 35 Nm
When fitting directly, please ensure the ServiceJunior can be rotated freely.