EasyManua.ls Logo

Parkside 100131 - User Manual

Parkside 100131
64 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
W
ET AND DRY VACUUM CLEANER PNTS 1400 D1
WET AND DRY VACUUM CLEANER
Translation of original operation manual
MÄRKÄ- JA KUIVAIMURI
Alkuperäisen käyttöohjeen käännös
NAT- EN DROOGZUIGER
Vertaling van de originele gebruiksaanwijzing
V
ÅT- OCH TORRDAMMSUGARE
Översättning av bruksanvisning i original
NASS- UND TROCKENSAUGER
Originalbetriebsanleitung
IAN 100131
100131_par_Nass-Trockensauger_cover_FI_NL.indd 2 11.06.14 16:19

Table of Contents

Other manuals for Parkside 100131

Preview: Original Operation Manual
Original Operation Manual88 pages

Questions and Answers

  • S
    seanmorenoAug 11, 2025
    Why does my Parkside 100131 Vacuum Cleaner have low suction?
    • K
      Kenneth ColonAug 11, 2025
      Low suction in your Parkside Vacuum Cleaner can be due to several reasons. Check if the hose system or jets are blocked and remove any obstructions. Ensure the suction pipe is assembled correctly. Make sure the container is closed and not full; empty the container if necessary. Also, the filter might be full or clogged, so empty, clean, or replace it. Finally, ensure the float in the filter basket moves freely; release it if it's stuck.
  • C
    Catherine ZunigaAug 22, 2025
    What to do if my Parkside Vacuum Cleaner does not start?
    • W
      wwolfeAug 22, 2025
      If your Parkside Vacuum Cleaner isn't starting, the issue might stem from a few causes. First, check the power supply: ensure the plug socket is working, and inspect the cable, line, plug and fuse. If there are any issues, consult an electrical specialist for repairs. Another possible cause is a defective on/off switch, which requires repair by Customer Care.
  • K
    Kelsey HuynhSep 1, 2025
    What to do if the float in my Parkside 100131 does not switch the appliance off?
    • J
      Jay BrownSep 1, 2025
      If the float in your Parkside Vacuum Cleaner isn't switching off the appliance, it could be stuck. Try releasing the float. If the issue persists, the float may be faulty, requiring repair by Customer Care.

Parkside 100131 Specifications

General IconGeneral
BrandParkside
Model100131
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals