Parkside 100131 - Assembly; Operation; Switching On;Off; Dry Vacuuming

8
GB IE
• Observe the instructions for cleaning
and maintenance of the machine.
• Store the appliance in a dry place and
out of reach of children.
Assembly
Pull out the mains plug.
Danger of electric shock.
The appliance is supplied with the
folded lter (
23) tted.
1. Place the 4 steering castors (11) onto
the mounts on the stainless steel con-
tainer (9). Attach each steering castor
with a crosshead bolt (11a).
2. Fit the bow handle (1) onto the two
bow handle tie bars (2) and screw it in
place with 2 crosshead bolts (1a).
3. Fold down the bow handle (1) towards
the suction nozzle (8). Place the motor
head (3) on the stainless steel contain-
er (9). Close the stainless steel contain-
er by folding up the bow handle and
xing it with the locking levers (14)
. The tension can be adjusted
with the locking lever adjusting screw.
Several positions are possible for the
bow handle.
4. Fit the accessories:
- Connect the suction hose (19).
- Fit the handle (20)
- Fit the telescopic suction pipe (17).
(Press the knob on the telescopic
suction pipe in the
direction and
separate to the desired length).
- Fit the desired nozzle (25/26).
Never vacuum without a lter!
To store the suction set during
breaks, push together the telescopic
suction hose (17) and plug the suc-
tion pipe holder (18) into the socket
on the motor housing (see picture
below).
Operation
Fully unwind the suction hose (
19) before commencing work.
Switching on/off
Connect the mains plug.
Do not vacuum without a lter!
(How to insert the lter is described
in the chapters “dry vacuuming“
and “wet vacuuming“).
Switching On:
On/Off Switch (see
6) In position “I“.
Switching Off:
On/Off Switch (see
6) In position “0”.
Dry vacuuming
The appliance is supplied with the
folded lter (
23) tted.
Vacuuming with a uted lter:
1. For dry vacuuming, t the uted lter
(23) onto the lter basket (27) on the
motor head (3). The sealing lip that
curves upward must point away from
the motor head.
2. Fit the lter cover (22) and lock it with
a light turn:
Lock the lter cover
Unlock the lter cover