GB 29
Remark: During replacing the batteries, the program data will be saved for
approx. 15 seconds. If replacing the batteries takes longer time, all program data
will be saved and the time will remain at the time before the batteries were removed.
If the water gate is open before removing batteries, it will automatically turn off
the water gate when the batteries are inserted again.
The ”OFF” will also show when the battery is low (see Fig. E11). Replace the
batteries.
Power off mode
When no key being pressed for 5 minutes, all displays will be turned off, all schedules
and time will continue to run. Press any key to wake up the display and exit the
power off mode.
To Next Page
Loading...
