Parkside PBCG B2 - Operation; Putting the Product into Operation; Setting Current Time and Day of Week

GB 23
Operation
Irrigation can be fully automated at any time of the day using the irrigation con-
troller. A sprinkler, sprinkler system or drip irrigation system may be connected.
The irrigation controller automatically carries out irrigation at the respective pro-
grammed start time and for the programmed duration. Take the season and time
of the day into consideration when programming. Evaporation and water consumption
is lowest early in the morning or late in the evening.
Putting the product into operation
1. Insert batteries to the item as described in the chapter “Inserting/replacing
batteries”.
2. Connect the water timer to the water tap (see Fig. D).
Setting current time and day of week
1. In normal mode, press the button
5
and button
4
together to enter
time setting mode or turn the rotary control
6
to select time setting (not necessary
if you just insert batteries).
- The clock display in the current time
12
will flash on screen.
- Press the button
5
.
- The hour display in the current time
12
will flash on screen.