EasyManua.ls Logo

Parkside PBCG B2 - Cleaning and Care; Cleaning the Filter

Parkside PBCG B2
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32 GB
Cleaning and Care
ATTENTION! Potential damage to the product. Moisture entering the pro-
duct may result in damage. Ensure no moisture enters the battery compartment
8
during cleaning to prevent damaging the product beyond repair.
Only clean the housing with a slightly damp cloth and mild washing-up liquid.
Never use petrol, alcohol or other aggressive cleaning agents to clean the
housing.
Cleaning the filter
The filter
2
must be regularly checked and cleaned if necessary.
Close the tap.
Allow the product to run dry by manual irrigation.
Unscrew the union nut
3
from the tap or adapter thread.
Remove the conical filter
2
from the water inlet in the union nut.
Clean the filter.
Reinsert the filter.
Screw the union nut
3
onto the thread of the tap or adapter.
Open the tap.

Table of Contents

Related product manuals