To Next Page
K
Kimberly MartinAug 4, 2025
Why won't my Parkside PBS 2 A1 start?
- JjonesericaAug 4, 2025
If the engine of your Parkside Trimmer doesn't start, there are several potential causes: * The fuel tank may be empty, in which case you should refill it. * The starting sequence may be incorrect; refer to the manual for proper instructions. * The engine might be flooded; remove some gas and try starting it again. If necessary, remove, clean, and dry the spark plug. * The spark plugs could be sooted or have an incorrect spark gap; clean, adjust, or replace them. * The spark connection or ignition cable may be damaged; replace them if needed. * The carburetor jets might be dirty, or the carburetor mix may be incorrectly adjusted; have a specialist workshop clean and adjust the carburetor. * The fuel filter may be blocked; replace or clean it.
General
