9
NI
IE
Read the operating instructions
carefully before using the equip-
ment.
Wear eye protection.
Wear head protection.
Wear ear protection.
Wear protective gloves.
Risk of injury from cuts.
Wear safety boots with sturdy
soles.
Maintain a safety dis-
tance of min. 15 m
from others.
Danger from parts being thrown
out! Keep away from other peo-
ple.
Do not use any circular- or multi-
toothed saw blades!
Risk of injury.
Caution! Hot surfaces –
risk of burns!
Attention! Kickback - be aware
that you may experience kick-
back while working with the
machine.
sound power level L
WA
in dB.
Mix ratio 40:1,
Use ONLY fuel mix
smoking are prohibited.
Use ONLY fuel mix
Start-up Sequence
General Safety Information
Do not allow access by children or by peo-
carefully supervised when they are in the
area of machinery. Observe the regional
and local accident prevention regulations
applicable where you are. The same ap-
plies for all regulations concerning occupa-
tional safety and health in the workplace.
The manufacturer cannot be held liable if
the machines produced by the same are
age to people or property occurs as a
Warning! Always take basic
precautions when using ma-
chinery. Please also observe
all tips and information in
the additional safety infor-
mation.
1. Observe the surrounding conditions un-
der which you are working. The motor-
ised equipment produces toxic fumes
as soon as the engine is running. These
gases may be odourless and invisible.
Therefore, never work with the equip-
ment in enclosed or poorly ventilated