Parkside PHSL 710 A1 - Translation of the Original EC Declaration of Conformity

297
Translation of the original
EC declaration of conformity
We hereby conrm that the
Long-Reach Hedge Trimmer
design series PHSL 710 A1
serial number 000001 - 023000
conforms with the following applicable relevant version of the EU guidelines:
2006/42/EC • 2014/30/EU • 2000/14/EC & 2005/88/EC
2011/65/EU* & (EU) 2015/863
In order to guarantee consistency, the following harmonised standards as well as
national standards and stipulations have been applied:
EN 62841-1:2015 • EN 62841-4-2:2019
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021 • EN 61000-3-3:2013/A2:2021
EN IEC 63000:2018
We additionally conrm the following in accordance with the 2000/14/EC emissions
guideline: sound power level:
guaranteed: 101 dB;
measured: 99.4 dB
Compliance evaluation process carried out
in accordance with Appendix V, 2000/14/EC
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Christian Frank
Documentation Representative
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
15.06.2023
* The object of the declaration described above satises the provisions of Directive
2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of
certain harmful substances in electrical and electronic appliances.
GB
MT