GB MT
40
Spare Parts/Accessories
Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form. If you have any other questions,
contact the service centre (see “Service-Center” Page 39).
Pos. exploded drawing Description Order No.
1 Round handle with pivotal centre 91110410
2 Shoulder strap 91110411
Trouble Shooting
Problem Possible cause Fault correction
Device does not
start
Mains voltage not on
Check plug socket, cable, line and
plug, where appropriate, have repaired
through electrical specialist
On/Off switch (16) defective
Repair by Service CentreWorn carbon brushes
Defective motor
Device runs with
interruptions
Power cable is damaged
Check the cable and have it changed
by the Service Centre if necessary
Internal loose electrical
connection
Repair by Service Centre
On/Off switch (16) defective
Blades become
hot
Blades (1) are blunt
Have the blades (1) sharpened or
replaced (Service Centre)
Blades (1) are notched
Have the blades (1) checked or
replaced (Service Centre)
Too much friction due to lack
of lubrication
Oil the blades (1)
To Next Page
Loading...
