To Next PageTo Next PageWhy does the ventilator not work in Parkside PPSK 40 A1?
The ventilator in your Parkside Welding System may not work due to a few reasons. Check if the device is properly connected to the socket, as the power line might be interrupted. Other possible causes are a faulty power line ventilator or a faulty ventilator.
Why doesn't the output current decrease in Parkside PPSK 40 A1?
If the output current does not decrease in your Parkside Welding System, it could be due to low input voltage. Ensure you observe the input voltage according to the type plate. Additionally, the connection cable cross-section might be too low.
What to do if the air current cannot be regulated in Parkside Welding System?
If the air current cannot be regulated in your Parkside Welding System, it might be because the compressed air hose is damaged or faulty. Try a new connection of the hose. Another possible cause is failure of the valve or manometer.
General| Input voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Welding current | 40 A |
| Protection class | IP21S |
| Electrode diameter | 1.6 / 2.0 / 2.5 mm |
| Welding current range | 10-40 A |
| Duty cycle | 40% at 40 A |
Specifies the authorized applications and purpose of the plasma cutter.
Lists all items included in the product packaging.
Details and identifies all components of the plasma cutter.
Covers risks from electric shock, sparks, fire, and necessary precautions.
Addresses dangers from fumes, arc beams, and electromagnetic fields.
Guidelines for safe working environments and operational practices.
Precautions for tight spaces, voltage, and device handling.
Protection against rays and EMC classification standards.
Specifies requirements for a safe and effective installation environment.
Guides on choosing and connecting the compressed air source.
Instructions for connecting the cutting torch and ground cable.
Details on how to attach the optional roller guide for cutting.
Step-by-step guide for powering on and initiating cutting.
Explains drag cutting, distance cutting, and perforation methods.
Addresses issues with indicator lamps and the ventilator.
Solutions for no output, decreasing output, and arc interruptions.
Troubleshooting insufficient penetration and air regulation.
Resolving problems with HF-arc creation and burner readiness.
Addresses rapid consumable wear and slag formation.
Guidelines for maintaining and replacing burner components.
Procedures for cleaning, upkeep, and proper storage of the device.
Instructions on environmentally responsible disposal of the device.
Statement confirming compliance with EU safety directives.
Details on warranty period, conditions, and extent of coverage.
Steps to follow for submitting and processing warranty claims.
Information on how to contact customer service and order parts.
