Parrot BLAZE - Switching On the MiniDrone; Connecting a Smartphone

Switching on the MiniDrone
Insert the battery into the slot or press the On/Off button
underneath the MiniDrone.
[The on/off button is located under the Mini Drone, below
and to the right of the vertical camera.]
Then
place your MiniDrone on a flat surface so it can
complete its initialisation phase.
The eyes
of the Mini Drone will turn red, amber, and then green.
Connecting a smartphone
You need a smartphone or tablet which supports Bluetooth® 4.0 to use the
Mini Drone. Check whether your smartphone is compatible on www.parrot.com/uk/
compatibility .
Since
the MiniDrone uses 8/uetooth® Low Energy, it will not be displayed in the
normal list of 8/uetooth® devices shown on your phone. You will only be able to
see it and connect to it via the FreeFiight3 app.
1. Activate the 8/uetooth® function on your smartphone.
2. Launch the FreeFiight3 app.
3. Press = to bring up the list of Mini Drones located near your smartphone.
> The MiniDrone will connect to your smartphone automatically. A pop-up
window saying .. Sending status .. and then .. Connected .. will appear.
>The 0 icon shows which Mini Drone is currently connected.
> The ~ icon indicates the status of the 8/uetooth® connection between your
smartphone and the MiniDrone. The number of bars displayed indicates the
quality of the connection.
If your phone doesn•t automatically connect to the Mini Drone, select the name of
your Mini Drone from the list.
Before getting started s