ENGLISH
15
- User :
When several telephones are connected to Parrot EVOLUTION, this function identifies
the telephone with priority. The phone with the highest priority is the first phone to which
the kit tries to connect to.
Click Yes, "Main user?" is displayed, confirm.
- Caller ID
:
This function lets you know the identity of the caller. With this function enabled, when
you receive a call, the name of the person calling you is pronounced if it is already
stored in your phone book and corresponding voice tag is assigned.
Click Yes and select "Enable" or "Disable".
- Multi-Tel :
This function is available for Ericsson and Sony Ericsson phones equipped only with the
"Headset" profile. The affected phones are Ericsson R520, T39, T68m and the first Sony
Ericsson T68i phones (software version lower than R2E). This option allows the
simultaneous use of these different phones during a single session of use.
The first phone getting connected to the Parrot EVOLUTION is the main phone for the
use session of the car-kit (until extinction).
If the option "Multi-Tel" is activated for this phone, the Parrot EVOLUTION will accept
incoming calls from the other phones if they were previously paired with the Parrot
EVOLUTION.
- W
arning :
The "Multi-Tel" function is now compatible with the T68i, T610, T616, T618, Z600 and
Z608 (with specific software versions). This function is available when the "Powersave"
mode is activated in the phone, i.e. "Headset" profile mode.
Once this mode activated, the Parrot EVOLUTION has to identify every phone in this
new mode. It should be necessary to connect separately each phone with the Parrot
EVOLUTION and restarting it between each identification.
Parrot EVOLUTION
To Next Page
Loading...
Need help?
General
