Name: Parrot SKYCONTROLLER 2
Brand: Parrot
Rating: 4 (1 reviews)

To Next Page

To Previous Page

QUICK START

This guide will enable you to handle Parrot Bebop

2 quickly. For more detailed information go to the

Support section on our site www.parrot.com/support/

CHARGING THE PARROT BEBOP 2

BATTERY

1. Take the plug (supplied) appropriate to your

country and plug it into the charger.

2. Connect the supplied cable to the charger.

3. Connect the battery to the charger's cable, and

then plug the charger into the mains. The warning

light is red while charging and then turns green

when the battery is charged. The battery charge

time is approximately 55 minutes. Flying time is

approximately 25 minutes.

> N.B.: If the charger’s warning light blinks red,

contact Parrot after-sales or your dealer.

For any questions relating to the battery visit

www.parrot.com/support

CHARGING PARROT

SKYCONTROLLER 2

1. Take the adapter appropriate to your country and

ﬁx it on the charger.

2. Connect the charger cable to Parrot Skycontroller

2, then plug the charger into the mains.

Other manuals for Parrot SKYCONTROLLER 2

Questions and Answers:

Need help?

Do you have a question about the Parrot SKYCONTROLLER 2 and is the answer not in the manual?

General