UPDATING SEQUOIA
VIA AN SD CARD
1. Insert your SD card in a computer and make sure that
it contains no les in .plf format.
2. Visit the Sequoia support page: www.parrot.com/fr/
support/
3. Download the update le available in .plf format.
4. Copy the le to the root directory on your SD card
without putting it in a folder or renaming it.
5. Insert the SD card in the sunshine sensor.
6. Turn on the drone.
>The update launches automatically. During the up-
date the multispectral sensor indicator light flashes
orange. Once the update is complete the light
turns green.
To Next Page
Loading...
