32
VIA THE SEQUOIA WEB
INTERFACE
Connect to the drone’s Wi-Fi network then enter
the IP address 192.168.42.2 into the Web browser.
1. Visit the Sequoia support page:www.parrot.com/
support/
2. Download the update le available in .plf format.
3. Connect to the Sequoia Web interface.
4. Go to Settings.
5. Click on Update Sequoia.
6. An explorer window will open.
7. Select your update le and click Open.
8. A Send button appears in the Settings page.
9. Click the Send button.
>The update will automatically launch, the multis-
pectral sensor’s indicator light will turn orange.
To Next Page
Loading...
