Parsun F6ABM - 2.3 Pre-operation checks


11

2.3 Pre-operation checks
Fuel
 Check to be sure you have plenty of fuel for your trip.
 Make sure there are no fuel leaks or gasoline fumes.
 Check fuel line connections to be sure they are tight.
 Be sure the fuel tank is positioned on a secure, flat surface, and that the fuel line is not twisted or flattened,
or likely to contact sharp objects.

Controls
 Check throttle, shift and steering for proper operation before starting the engine.
 The controls should work smoothly, without binding or unusual free play.
 Look for loose or damaged connections.
 Check operation of the starter and stop switches when the outboard motor is in the water.
CAUTION:
 Do not start the engine out of water. Overheating and serious engine damage can occur.
 Check the engine and engine mounting.
 Look for loose or damaged fasteners.
 Check the propeller for damage.
Checking the engine oil level
1. Put the outboard motor in an upright position (not tilted).