42
3.13 Maintenance table
When utilized under normal condition, maintained and repaired in the proper manner, the outboard motor can
work normally within the normal life period.
Frequency of maintenance operations may be adjusted according to the operating conditions, but the
following table gives general guidelines.
The “●” symbol indicates the check-ups which you may carry out by yourself.
The “○” symbol indicates work to be carried out by your dealer.
Item
Operations
Initial Every
10 hours
( 1 month )
50 hours
(3 months)
100 hours
(6 months)
200 hours
( 1 year )
Anode(s) (external)
Check/replacement ●/○ ●/○
Anode(s) (internal) Check/replacement ○
Cooling water
passages
Cleaning ● ●
Cowling clamp Check ●
Fuel filter (one time) Check/cleaning ●/○ ●/○ ●/○
Fuel system Check ● ● ●
Fuel tank (built-in
tank)
Check/cleaning ○
Fuel tank (portable
tank)
Check/cleaning ●
Gear oil Change ● ●
Greasing points Greasing ●
To Next Page
Loading...
