10
When the handle is in zero position,
the motor does not rotate and the
ship is in a stop state.
When the handle is turned
counterclockwise from the zero
position, the ship moves forward and
accelerates, otherwise it decelerates.
When the handle is turned clockwise
from the zero position, the ship
travels in the opposite direction and accelerates, otherwise it decelerates.
Note: Before turning on the power supply, the speed control handle must be in the
zero position; otherwise, the motor will not turn after turning on the power supply.
3.4 Shutdown
This product can be shut down manually or automatically.
Manual shutdown: Press and hold the button below the screen on
the handle for 2 seconds. After hearing the prompt tone, release the
button, the screen goes out and the shutdown is completed.
Automatic shutdown: When the outboard motor is stopped, the screen
will automatically turn off after 1 hour, and the shutdown will be
completed.
To Next Page
Loading...
Need help?
General
