20
8. Emergency Handling
8.1 Impact damage
If the outboard motor is accidentally impacted underwater during
operation, please take the following measures.
1. Stop the motor immediately, and check whether the mechanical parts
of the motor are damaged and whether the control system can be
controlled normally.
2. Drive carefully and slowly back to the nearest dock or shore.
3. Contact the authorized agent for maintenance, and ensure that the
motor works normally after the maintenance before reuse.
8.2 Accidental falling into water
If the overboard motor accidentally falls into the water during use, please
take the following measures.
1. Stop the machine immediately and disconnect the power supply.
2. Contact the authorized agent for maintenance, and ensure that the
motor works normally after the maintenance before reuse.
8.3 Low voltage protection
When the battery voltage is lower than the minimum voltage that enables
the outboard motor to work normally, the outboard motor will
automatically stop working to avoid over discharge of the battery. If you
are far away from the shore at this time, it is recommended to wait for
about 10 minutes. After the battery voltage recovers to some extent, you
can turn on the motor with a power of less than 100W to return to shore.
To Next Page
Loading...
Need help?
General
