3.2 Cleaning and adjusting spark plug
You should periodically remove and inspect the spark plug because heat and deposits will cause
the spark plug to slowly break down and erode.
If necessary, you should replace the spark plug with another of the correct type. Before fitting the
spark plug, measure the electrode gap with a wire thickness gauge; adjust the gap to specification
if necessary.
ays clean the
When fitting the plug, alw t.
Wipe off any dirt from the threads and screw in the spark plug to orrect torque.
1. Check the fuel lines for leak is found, your PARSUN
0.9-1.0mm
gasket surface and use a new gaske
the c
3.3 Checking the fuel system
s, crack, or malfunction. If a problem
mechanic should repair it immediately. dealer or other qualified
WARNING:
z l leakage regularl
z kage is found, the fu
y. Check for fue
If any fuel lea el system must be repaired by a qualified mechanic.
28
To Next Page
Loading...
Need help?
General
