3.7 Checking propeller
WARNING:
z ting, removing or ays take actions to ensure the
engine will not accidentally start, such as removing the spark plug caps from the spark
Before inspec installing the propeller, alw
plugs, placing the shift control in neutral, and removing the lanyard from the engine stop
switch, etc.. Serious accident could occur if the engine starts when you are nearby.
z
nut. Put a wood block between the anti-cavitation plate and the propeller to prevent
Do not use your hand to hold the propeller when loosening or tightening the propeller
the propeller from turning.
1. Check each of the propeller blades for wear, erosion from cavitation or ventilation, or other damage.
30
To Next Page
Loading...
Need help?
General
