4.2 ing
When storing your PARSUN outboa onged periods of time (2 months or longer),
sev
stor
Stor
rd motor for prol
eral important procedures must be performed to prevent excessive damage.
It is advisable to have your outboard motor serviced by an authorized PARSUN dealer prior to
age. However, you, the owner, with a minimum of tools, can perform the following procedures.
CAUTION:
lace the outboard motor on its side before the cooling water has drained from itz Do not p
completely.
Store the outboard motor in a dry, well-ventilated place, not in direct sunlight. z
1. Wash the outboard motor body using fresh water.
2. Place the fuel cock in the closed position, disconnect the fuel line and tighten the air vent screw, if
equipped.
3. Remove the engine top cowling
and silencer cover.
1
2
1. Lowest water level
. Water surface 2
4. Install the outboard motor on the
test tank.
39
To Next Page
Loading...
Need help?
General
