Partner RP-330 - 1.2 Character Specifications; 1.3 Auto Cutter

RP-330 Technical Manual
4
1.2 Character Specifications
1) Number of characters: Alphanumeric characters: 95
Extended graphics 128 × 7 pages
(including one space page)
International characters: 32
① English
② Hangul
③ Chinese (GB2312,Big5)
④ Kanji
2) Character structure: Font A: 12 ⅹ 24
Font B: 9 ⅹ 17
Hangul, Chinese: 24 ⅹ 24
Font A is selected as the default
3) Character size:
EPSON Emulation
STAR Emulation
Dot density
0.141ⅹ0.141mm/dot
(180*180dpi)
0.125ⅹ0.125mm/dots
(203*203dpi)
[dpi: dots per 25.4mm{1"}]
3)Printing direction
Unidirectional With friction feed
4)Paper width
82.5mm
(3.25")
80mm
(3.15")
60mm
(2.36")
58mm
(2.28")
82.5mm
(3.25")
80mm
(3.15")
60mm
(2.36")
58mm
(2.28")
5)Maximum
printable area
72.2mm
(512dots)
72.2mm
(512dots)
54.1mm
(384dots)
50.8mm
(360 dots)
80mm
(640dots)
72mm
(576 dots)
54.5mm
(436 dots)
52.5mm
(420 dots)
6)Character / line
Font A (12ⅹ24)
42
42
32
30
53
48
36
35
Font B (9ⅹ24)
56
56
42
40
71
64
48
46
Kanji Font (24ⅹ24)
21
21
16
15
26
24
18
17
1.3 Auto Cutter
Partial cut: Cutting with one point center uncut
NOTE: To prevent dot displacement, after cutting, paper must be fed
approximately 1mm(14/360 inches) or more before printing.