Parweld XTM404S - EC Declaration of Conformity; Rohs Compliance Declaration

9.0 EC Declaration of Conformity
Hereby we declare that the machines as stated below
Type: XTM404S
Complies with Low Voltage Directive 2014/35/EEC
EMC Directive 2014/35/EEC
European standard: EN/IEC 60974-1 – EN 60974-10
This is to certify that the tested sample is in conformity with all provisions of the above detailed EU directives and product standards.
9.1 RoHS Compliance Declaration
Directive 2011/65/EU of the European Parliament
Amended 2015/863 and 2017/2102
Restriction of use of certain hazardous substances in electrical and electronic equipment
Type: XTM404S
The above listed products are certied to be compliant with the RoHS directive with all homogeneous component parts being controlled to ensure
material contents as per the list below.
Cadmium 0.01% by weight
Lead 0.1% by weight
Mercury 0.1% by weight
Hexavalent chromium 0.1% by weight
Polybrominated biphenyl’s (pbbs) 0.1% by weight
Polybrominated diphenyl ethers (pbdes) 0.1% by weight
It should be noted that under specic exempted applications, where lead is used as an alloying element the following limits are applied in
accordance with the regulations.
Copper and copper alloy parts use less than 4% by weight of each homogeneous component.
Steel and steel alloy parts use less than 4% by weight of each homogeneous component.
Aluminium and aluminium alloy parts use less than 4% by weight of each homogeneous component.
www.parweld.com
18