Paslode 403606-10 - Page 2

PASLODE MODEL NUMBER DESIGNATION
The model number of each Paslode tool contains information about the tool and the fasteners
that are used with it. The following example illustrates the information contained in this tool
model number.
STAPLER
Tool application letter
Maximum fastener
length, in inches that
can be used with the
tool
00 - S 00 P
Type of tool
( P= powerpack)
( DL= double length)
Gauge of fastener
Indicates crown size
( W = wide)
( S = standard)
( I = intermediate)
( N = narrow)
Maximum fastener
length in millimeters
O
000
/
Paslode is a member of:
NAILER
Tool application letter
Maximum fastener
length, in inches that
can be used with the
tool
/
O
000
Type of tool
( C = coil nailer)
( S = strip nailer)
( F = finish nailer)
( R = Roof nailer)
Power Pack
C P
00
Maximum fastener
length in millimeters