Step 9
Lightly lubricate the Seal Rings with
Paslode Lubricating Oil, part #401482.
Make sure oil is applied evenly around the
Seal Rings. Set the Cylinder Head
Assembly aside.
Note:
Paslode Lubricating Oil is
specially formulated for use in the
Paslode Cordless Tool. The use of other
types of lubricants may cause rapid
build-up of combustion residue or result
in premature part failure.
Step 10
Push the Piston Assembly to the "down
position” using a screwdriver handle or a
clean piece of wood.
6
To Next Page
