Step 15
Manually push the Driver Blade up and
down to distribute the oil in the Sleeve
evenly.
Reassemble the Paslode Cordless tool
following disassembly Steps 1-4, pages 2-3
in Reverse order.
Reassembly Note:
Before tightening Cap Screws, depress
the nose of the tool down on its work
contacting element to close Combustion
Chamber. Make sure cylinder head is
centered to the motor, and that the Cap
Assembly does not pinch exposed wires,
Cap Screws must be tightened securely.
9
To Next Page
