To Next PageTo Next PageHow to fix a Paslode Positive Placement PF150S-PP that operates but doesn't drive fasteners?
To resolve this, check the magazine to ensure that it contains the proper fasteners and that the fasteners slide freely without pressure from the follower. Also, increase the air pressure, but do not exceed 120 psi.
What to do if fasteners will not drive completely into wood using Paslode Positive Placement PF150S-PP?
If the fasteners are not driving completely into the wood, increase the air pressure to the Paslode Nail Gun, but do not exceed 120 psi.
Details the specifications for the tool, including model, dimensions, and operating pressure.
Lists specifications for nails, such as length, diameter, and coatings.
Instructions on how to load fasteners into the nailer.
Explains the process for driving fasteners with the tool.
Explains the function and use of the nose probe for accurate nail placement.
Guidelines for setting up an indoor air supply for the tool.
Guidelines for setting up an outdoor air supply for the tool.
Specifications for essential air system components.
Method for determining the appropriate compressor size for operation.
Guidance on selecting the correct pipe diameter for air systems.
Maintenance practices for pneumatic air systems.
Specific care instructions for tool operation in freezing temperatures.
Procedures to verify correct operation after maintenance or repair.
Importance and methods of lubricating the tool for optimal performance.
Outlines the terms and limitations of the tool's warranty coverage.
The official declaration of warranty terms and conditions.
Lists parts considered normal wear items and excluded from warranty.
Details the specifications for the tool, including model, dimensions, and operating pressure.
Lists specifications for nails, such as length, diameter, and coatings.
Instructions on how to load fasteners into the nailer.
Explains the process for driving fasteners with the tool.
Explains the function and use of the nose probe for accurate nail placement.
Guidelines for setting up an indoor air supply for the tool.
Guidelines for setting up an outdoor air supply for the tool.
Specifications for essential air system components.
Method for determining the appropriate compressor size for operation.
Guidance on selecting the correct pipe diameter for air systems.
Maintenance practices for pneumatic air systems.
Specific care instructions for tool operation in freezing temperatures.
Procedures to verify correct operation after maintenance or repair.
Importance and methods of lubricating the tool for optimal performance.
Outlines the terms and limitations of the tool's warranty coverage.
The official declaration of warranty terms and conditions.
Lists parts considered normal wear items and excluded from warranty.
General| Power Source | Pneumatic |
|---|---|
| Fastener Type | Nails |
| Operating Pressure | 80-120 psi |
| Fastener Collation | Paper Tape |
| Depth Adjustment | Yes |
| Nail Type | Round head |
| Nail Diameter | 0.131 inches |
| Magazine Capacity | 29 nails |
