43
■ Increasing the LED Units
Remove the LED unit located above the
unit which is intended to be attached.
1
Align the Positioning Mark after insertion,
then turn the unit clockwise to lock it.
2
3
Align the Positioning Mark after insertion,
then turn the unit which is removed ( 1 )
clockwise to lock it.
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
To Next Page
Loading...