Patriot Lighting 29145

Need help?

Do you have a question about the Patriot Lighting 29145 and is the answer not in the manual?

Summary

Safety Information

General Safety Warnings

Key safety warnings for installation, maintenance, and operation to prevent fire, shock, or injury.

Installation Cautions

Important cautions regarding proper installation, electrical connections, and fixture usage.

Assembly Instructions

Mounting the Fixture

Step-by-step guide for marking and attaching the fixture housing to the mounting surface.

Connecting Cords

Instructions for plugging in the power cord and affixing retaining clips.

The Patriot Lighting Undercabinet Light, Model #29145 (Item #346-0930), is designed for indoor use to provide illumination under cabinets. It is a linear light fixture that can be installed individually or as part of a series of up to 10 fixtures, or a combined wattage of 100W, of the 27-inch model (29146).

Function Description:

The underrcabinet light provides task or accent lighting in areas such as kitchens, offices, or workshops. It operates on a 120-volt input and features a polarized plug for safety. The fixture can be connected to a power outlet using the included outlet cord (Part A) or interconnected with other compatible fixtures using the interconnection cord (Part C). The fixture itself (Part B) houses the light source.

Important Technical Specifications:

Model Number: 29145
Item Number: 346-0930
Compatibility: Only compatible with fixture models 29145 & 29146.
Maximum Fixtures per Run: Not to exceed 10 of the 27-inch fixtures (model 29146) or a combined fixture wattage of 100W.
Power Input: 120 volts.
Mounting Surface Thickness: Must be at least 1/2 inch thick.
Clearance for Interconnection Cord: A minimum of 2-1/2 inches is required between fixtures when installing multiple units.
Installation Type: Intended for surface installation. Not for recessed installation in ceilings or soffits. Not for surface installation inside built-in furnishings such as kitchen cabinets, china cabinets, or trophy cases.
Cord Routing: Cords must be routed and secured to prevent pinching or damage, especially if attached to a movable cabinet. Cords should not be concealed behind walls, ceilings, soffits, or cabinets where they may be inaccessible for examination, as per the National Electric Code (NEC).
Plug Type: Polarized plug (one blade wider than the other) for safety.
Safety Certifications: ETL Listed (Intertek).

Usage Features:

Easy Assembly: Estimated assembly time is 5 minutes.
Flexible Installation: Can be installed as a standalone unit or interconnected with other compatible fixtures.
Mounting: The fixture is attached to the desired surface using machine screws (BB). A 1/16-inch pilot hole may be drilled if needed.
Cord Management: Retaining clips (AA) are provided to secure the power and interconnection cords, keeping them tidy and out of sight. For cabinet-to-cabinet cord routing, a "V" notch can be cut into cabinet side panels.
Power Connection: The power cord (A) plugs into one end of the fixture (B), while the interconnection cord (C) can plug into either end of the fixture.
Indoor Use Only: Designed exclusively for indoor applications.
Non-Dimmable: Not for use with a dimmer.
Placement Restrictions: Do not mount over a sink or stove. Not for use with plastic furniture.

Maintenance Features:

Cleaning:
- Always ensure the electric current is turned off before cleaning.
- Use a soft, moist cloth with mild non-abrasive soap to clean the fixture. Avoid glass cleaner, as it can damage the metal finish.
- For optic cleaning, wear gloves to prevent finger oils from damaging the optics. Optics should only be cleaned if necessary, using a soft moist cloth with mild soap and water. Solvents should not be used as they may cause damage.
Cord Inspection: Cords should be visually examined periodically and immediately replaced if any damage is noted. Do not alter cords in any manner.
Troubleshooting: A basic troubleshooting guide is provided for common issues like the fixture not lighting, suggesting checking the power cord connection and ensuring the switch is "ON."

Safety Precautions:

Always turn off electric current before installation, cleaning, or maintenance.
Do not touch the hot lens.
Ensure the polarized plug is fully inserted into a polarized outlet. If it doesn't fit, reverse the plug. If it still doesn't fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug.
Use only the plastic clips provided to secure wires.
Do not substitute parts, leave parts out, or use worn/broken parts, as this could invalidate certifications.
If in doubt about installation, contact a qualified licensed electrical contractor.

Warranty:

The Patriot Lighting Undercabinet Light comes with a 5-Year Limited Warranty to the original purchaser, covering defects in material and workmanship under normal use. The warranty excludes expendable parts (like light bulbs, batteries), damage from misuse or abuse (including improper installation, accident, unauthorized repair, maintenance, or modifications), and products not installed in the U.S.A. It also excludes products installed within three miles of saltwater coastline or areas prone to salt spray, and does not cover losses, labor, injuries, or costs. A 2-year finish warranty protects against tarnishing, flaking, and discoloration. The warranty is void without the original sales receipt. For warranty claims or technical assistance, contact customer service at 1-800-554-6504 (M-F, 8 a.m. - 4:30 p.m. EST).