To Next PageTo Next Page
Need help?Do you have a question about the Patriot Lighting E4140 and is the answer not in the manual?
Crucial safety instructions, electrical compliance, fire risk, grounding, and handling wires.
Verifying all parts are present before assembly.
Essential points before assembly, including power requirements and sensor behavior.
Securing cross bar, mounting fixture, and ensuring level installation.
Connecting hot, neutral, and grounding wires using provided connectors.
Installing the bulb and understanding the adjustable knob's location.
Adjusting sensor sensitivity, time, and selecting operational modes.
Explains TEST, OFF, AUTO, PC, and Manual Override modes.
Details user-configurable settings for the fixture's operation.
Adjusting the duration the light stays on after motion stops.
Notes on optimal fixture height, detection range, and avoiding interference.
Lists parts available for re-order if damaged or missing.
Guidance on cleaning glass, metal surfaces, and the sensor lens.
Resolving problems like light not working, staying on too long, or blinking.
Details of the 5-year limited warranty, exclusions, and return policy.
This document provides comprehensive instructions for the assembly, installation, operation, and maintenance of the Patriot Lighting Outdoor Sensor Light, Model Number E4140. It is designed to guide users through the entire process, from initial setup to troubleshooting and understanding the various functions of the sensor light.
The Patriot Lighting Outdoor Sensor Light is a sophisticated outdoor lighting fixture equipped with a motion sensor and photocell, designed to provide automated illumination based on detected motion and ambient light levels. Its primary function is to enhance security and convenience by automatically turning on when motion is detected and turning off when motion ceases or during daylight hours. The fixture requires a 120 VAC, 60 Hz power source and is compatible with LED dimmable bulbs, offering flexibility in lighting choices.
The core functionality revolves around its intelligent sensor system. The motion sensor detects movement within its detection range, triggering the light to turn on. The photocell ensures that the light remains off during daylight hours, conserving energy by preventing unnecessary operation when natural light is sufficient. This combination allows for efficient and responsive outdoor lighting.
The light offers several operational modes to suit different user preferences and scenarios:
TEST MODE: This mode is primarily for setup and testing. In TEST MODE, the light will illuminate at a low-level brightness (0-50%) and switch to high-level brightness (full brightness) when motion is detected. It will remain at high brightness as long as motion continues and will revert to low-level brightness approximately 5 seconds after motion is no longer detected. This mode operates during both daytime and nighttime, allowing users to verify sensor functionality and detection range.
OFF MODE: Designed for nighttime operation, this mode ensures the light remains off until motion is detected. Upon motion detection, the light turns on at high-level brightness and stays on for a predetermined time (adjustable from 5 to 180 seconds) after motion stops, then automatically turns off. This is ideal for situations where light is only needed when activity is present.
AUTO MODE: Also for nighttime use, AUTO MODE combines motion detection with a low-level ambient light setting. At dusk, the light will turn on at a user-defined low-level brightness (0-50%). When motion is detected, it switches to high-level brightness and stays on as long as motion continues. After motion stops, it reverts to the low-level brightness for a predetermined time (5 to 180 seconds) before turning off automatically at dawn. This mode provides continuous minimum illumination with a boost for detected activity.
PC MODE: This mode is straightforward for nighttime operation. At dusk, the light turns on at high-level brightness (full brightness) and remains on until dawn, then automatically turns off. This is suitable for users who desire constant bright illumination throughout the night.
Manual Override MODE: This feature allows users to temporarily bypass the automatic sensor functions and keep the light on continuously for the entire night. To activate, the wall switch must be turned OFF and then ON within 3 seconds while the sensor is in "OFF" or "AUTO" mode. The light will stay on all night and turn off automatically at dawn. To return to "OFF" or "AUTO" mode, the wall switch must be turned OFF and then ON again within 3 seconds. This provides flexibility for specific needs, such as extended outdoor activities.
The dim-to-bright illumination option is highlighted for areas like front entrances or garage doors where a minimum level of illumination is desired throughout the night, with a brighter response to motion. Conversely, the dark-to-bright option is suggested for areas like backyards or back porches where continuous minimum brightness is not required.
The Patriot Lighting Outdoor Sensor Light offers several adjustable features that allow users to customize its operation to their specific needs and environment:
Adjustable Knobs and Slide Switch: The sensor lens can be rotated counterclockwise to reveal adjustable knobs for "TIME," "LOW LEVEL," and "SENS," along with a slide switch for mode selection (TEST, OFF, AUTO, PC). A small flathead screwdriver is used to make these adjustments. After adjustment, the sensor lens is rotated clockwise to restore its original position, protecting the controls.
Sensitivity Adjustment ("SENS" Knob): The sensitivity of the motion sensor can be adjusted using the "SENS" knob. Turning the knob clockwise increases sensitivity, allowing detection from a minimum of 5 feet up to a maximum of 40 feet. Turning it counterclockwise decreases sensitivity. This feature is crucial for preventing false triggers from distant movements or for ensuring detection in specific areas.
Shut-off Delay Adjustment ("TIME" Knob): In "OFF" and "AUTO" modes, the "TIME" knob allows users to set the duration the light remains at high-level brightness after motion ceases. This delay can be adjusted from a minimum of 5 seconds to a maximum of 3 minutes. Turning the knob clockwise increases the delay, while counterclockwise rotation decreases it.
Low-Level Brightness Adjustment ("LOW LEVEL" Knob): In TEST and AUTO modes, the "LOW LEVEL" knob allows users to adjust the minimum brightness of the light when no motion is detected, ranging from 0% to 50% of full brightness. This enables users to set a comfortable ambient light level.
Mode Selection Slide Switch: The slide switch provides easy selection between the TEST, OFF, AUTO, and PC operational modes, offering quick changes to the light's behavior.
Warm-up Time: When power is first applied, the light will turn on immediately and undergo a 100-second warm-up period. During this time, any operations or adjustments are invalid, ensuring the sensor initializes correctly.
Detection Range and Angle: The sensor detects motion across a 180-degree range. It is more sensitive to motion across its detection path rather than motion directly towards it. For optimal performance, the fixture should be installed at least 6 feet above the ground, which can provide a detection distance of up to 40 feet at 77 degrees Fahrenheit.
Installation Considerations: The manual emphasizes the importance of mounting the lantern straight on the wall to avoid limiting the detection distance. It also advises against mounting the fixture near heat sources (like air conditioners, vents, or furnace exhausts) or facing reflective objects, as these can cause nuisance triggers.
Proper maintenance is essential to ensure the longevity and optimal performance of the Patriot Lighting Outdoor Sensor Light. The manual outlines specific care instructions:
Cleaning: The glass and coated metal surfaces of the fixture should be cleaned with a non-abrasive cleaner. Harsh abrasives, chemicals, or solvents should be avoided. The motion-detecting lens, which has a specially painted finish, requires particular care. It should only be dusted or wiped with a soft, dry cloth.
Regular Lens Cleaning: To ensure maximum sensitivity and performance, the sensor lens should be gently cleaned with a soft cloth every 1 or 2 months. This prevents dirt or debris from obstructing the sensor's view.
Environmental Considerations: The sensitivity of the motion sensor can be affected by environmental temperature, increasing as the temperature gets cooler. Users should be aware of this characteristic when observing sensor behavior.
Troubleshooting Guide: The manual includes a comprehensive troubleshooting section to help users diagnose and resolve common issues. This covers scenarios such as the light not working at all, staying on too long in TEST Mode, staying on at full brightness in OFF/AUTO Mode, staying on after dawn in PC/Manual Override Mode, blinking, or not having low-level brightness in TEST/AUTO Mode. Solutions often involve checking power connections, switch positions, sensor obstructions, and heat sources. If issues persist, consulting a certified electrician is recommended.
Five-Year Limited Warranty: The product comes with a five-year limited warranty, covering defects in material workmanship during normal use. This warranty allows for repair or replacement of the product or defective parts free of charge, provided the original sales receipt is presented. It explicitly excludes expendable parts (like light bulbs), damage from abuse or misuse, and associated losses or costs. This warranty provides specific legal rights that may vary by state.
In summary, the Patriot Lighting Outdoor Sensor Light is a versatile and user-friendly outdoor lighting solution designed for automated, motion-activated illumination. Its customizable settings, multiple operational modes, and clear maintenance guidelines ensure efficient, reliable, and long-lasting performance for various outdoor lighting needs.
General| Brand | Patriot Lighting |
|---|---|
| Model Number | E4140 |
| Category | Outdoor Light |
| Power Source | Hardwired |
| Voltage | 120V |
| Light Bulb Type | LED |
| Color Temperature | 3000K |
