Note: The calibration gas is selected automatically on the basis of the current EMF when
the calibration is saved.
75%EMF > 180mV3
50%130mV < EMF < 180mV2
25%EMF < 130mV1
Ready LED flashSensor signalCalibration gas
All calibrations can be deleted by pressing and holding and for 10 seconds.
6.4. Cleaning
Use only water or a light soap solution when cleaning the front panel.
SGI-3/OXI-3/OXI-3.1 User manual PBI-Dansensor A/S
PBI-210247-H UK 07/11/2005 15
To Next Page
Loading...
