PBI Dansensor SGI-3 - Operating Voltage Requirements; Environmental Conditions; Mechanical Data

The OXI-3 was designed to measure oxygen in inert gases (inert - argon/nitrogen/
helium).
Before leaving the factory, the device was calibrated with a N
2
/O
2
mixture.
9.8. Operating voltage
230VAC: (±10%), 50/60 Hz, max. 150 VA, rated: 60 VA.
Front-fitted fuse, Ø5 x 20 mm, 2AT.
115VAC: (±10%), 50/60 Hz, max. 150 VA, rated: 60 VA.
Front-fitted fuse, Ø5 x 20 mm, 4AT.
9.9. Acceptable ambient temperature, etc.
v Ambient temperature
during operation : 0 - 45 °C
during transport/storage : -20 - 45 °C
v Air humidity : 20 - 90 % RH - non-condensing.
v Protection class : IP21
9.10. Mechanical data
9.10. 1. SGI-3
v SGI-3 (HxWxD) : 300x238x188mm
v Transport box dimensions : 395x620x535mm
v Weight : 6.5 kg
v Weight incl. transport box : 10.4 kg
v Cabinet : Stainless steel, AISI 304 with rubber base and
handle
9.10. 2. OXI-3
v OXI-3 (HxWxD) : 300x238x188mm
v Transport box dimensions : 395x620x535mm
v Weight : 6.5 kg
v Weight incl. transport box : 10.4 kg
v Cabinet : Stainless steel, AISI 304 with rubber base and
handle
9.10. 3. OXI-3.1
v OXI-3.1 (HxWxD) : 242x238x170mm
v Transport box dimensions : 395x620x535mm
v Weight : 5.7 kg
v Weight incl. transport box : 9.4 kg
v Cabinet : Stainless steel, AISI 304
SGI-3/OXI-3/OXI-3.1 User manual PBI-Dansensor A/S
PBI-210247-H UK 07/11/2005 21