“SAS Super IAQ” Rev. 1 Pg. 8
ENGLISH
4.1. TO START WITH THE SAME AIR VOLUME AS THE PREVIOUS SAMPLE
ACTION DISPLAY
Switch on the ON/OFF
switch (black button)- wait
6 seconds
S
T
A
R
T
F
O
R
X
X
(Last aspirated volume of
air)
M / D / Y - H / M
Push “START” (after the
visual
(
X
X
)
X
X
display presentation) M
/ D / Y - H / M
4.2 TO START WITH ONE OF THE EIGHT OPERATOR PROGRAMMABLE
SAMPLING VOLUMES MEMORISED IN THE “USER MODE” PROGRAM
Up to eight volumes, can be programmed into the unit.
ACTION DISPLAY
Switch on the ON/OFF switch
STAR T FOR XX
(black button)
M/ D/ Y - H/ M
Press “¿” to select
USE R MODE
the USER MODE
M/ D/ Y - H/ M
Press “ENTER” to select the
S . P R OG XXXX
pre-memorized volumes
M/ D/ Y - H/ M
Press “¿” to select the chosen
S . P R OG XXXX
pre-memorized volumes
M/ D/ Y - H/ M
Press ENTER
START FOR XXXX
to confirm
M/ D/ Y - H/ M
Press START to run the sampling cycle.
The total number of available “USER MODE” programs is eight.
The maximum volume of air for each sampling cycle is 1999 litres.
To Next Page
Loading...
