“SAS Super IAQ” Rev. 1 Pg. 25
ENGLISH
SAS Super IAQ Bottom Panel
29. Protecting screw cap for tripod connection
30. Instrument Brief Instructions
31. Battery pack and PC Board
32. 33. 34. 35 Instrument feet
7.1 Messages shown on display
The following messages can be displayed:
INTERNATIONAL PBI Name of producer
S.N. XXXX Instrument Serial Number
PRESS ARROWS FOR
NEW MENU
SELECTION
Operator’s options
S. SAS IAQ Name of instrument
ID XXXX Operator’s identification
SITE XXXX Sampling location identification
START FOR XX The instrument is ready to collect the same volume of air as the
last sample
USER MODE 8 User volumes option
PROGRAM MODE Program to modify user program
DELAY MODE Program to delay sampling start:
1, 2, 3, 5, 10, 20 minutes
** DELAY ** The sampler is in “stand-by”, waiting to start
UTILITY MODE Program to set time, sampling site, operator’s identification,
language, clear record, display record, auto switching off
**LOW BATTERY** The battery of the instrument must be recharged
To Next Page
Loading...