PBI SAS SUPER IAQ - Operator Identification

“SAS Super IAQ” Rev. 1 Pg. 11
ENGLISH
ACTION DISPLAY
Press ENTER and then “¿”
SAMP L I NG SI TE
to select “SAMPLING SITE”
Sub-Menu
M/ D / Y - H/ M
Press ENTER
SAMP L I NG SI TE
to show sampling location
X XXX
Press “¿” to select the first
SAM P L I N G S I T E
letter or number
(1 Æ 9 A Æ Z)
X
XXX
Press ENTER and repeat selection
SAMP L I NG SI TE
for 2
nd
, 3
rd
and 4
th
letter or number
X X
XX
SAMP L I NG SI TE
X X X
X
SAMP L I NG SI TE
X X X X
Press ENTER to confirm.
4.4.3. “IDENTIFY”
This option is used to identify the operator. This should be changed if different operators use
the sampler and especially if the date is to be printed. The data is recorded in the file
“DISPLAY RECORD” (see paragraph 4.4.6).
Select UTILITY MODE Program.
ACTION DISPLAY
Press ENTER and then “¿”
“ I D E N T I F Y “
to select the IDENTIFY Sub-Menu
M / D / Y - H / M
Press ENTER to select
“ I D E N T I F Y “
operator identification XXXX