PBI SAS SUPER IAQ - ISO EN 17025 Documentation; Instrument Identification Sheet

“SAS Super IAQ” Rev. 1 Pg. 33
ENGLISH
SECTION SIX
10. AIR SAMPLER IDENTIFICATION SHEET ACCORDING TO ISO EN 17025
According to the Document ISO EN17025, to apply the current Good Laboratory Practice, it is
necessary to identify each instrument with a specific sheet. An example is here reported.
ISO EN 17025 Instrument Identification Sheet
Form n. XXXX
Date XXXX
Company / Institute XXXX
Laboratory XXXX
Name of Instrument Microbiological Air Sampler
Model SAS SUPER IAQ
Serial Number XXXX
Name of Producer International PBI
Name of Distributor XXXX
Condition at the moment of arrival (X) new; (x) used; (x) reconditioned
Date of Arrival / /
Date of initial use / /
Usual collocation Room XXXX
Servicing details See servicing POS
Instrument to be calibrated (X) Yes; (X) No
Periodic Calibration (X) monthly; (X) quaterly; (X) Yearly
Instrument to be validated (X) Yes; (X) No
Periodic Validation (X) half year; (X) yearly