Chapter 1: Installing Your Faxmodem 5
Chapter 1: Installing Your Faxmodem
Windows 95, 98, and Windows 2000
We have enhanced Windows’ plug-and-play capability
and streamlined the installation of your modem by in-
cluding an InstallShield® software program. For Win-
dows 95, 98, and 2000 computers, you must first run
this program before you install your faxmodem.
This InstallShield® program installs “driver” files and sets
up your computer to recognize the new faxmodem. When
you restart your computer after installing the faxmodem,
your hard drive will already contain the files Windows
needs to complete the installation. Continue with
Installing the Drivers section on page 6.
Windows NT 4.0
For computers running Windows NT 4.0, we’ve also
streamlined the installation, but the sequence is differ-
ent. You must first install your new faxmodem, then
run the InstallShield program. To begin installing your
new PCI faxmodem with Windows NT 4.0, go to page 8,
Installing the Faxmodem Card.
To Next Page
Loading...