6 Quick Start and Reference Guide
Installing the Drivers
For Windows 95, 98, and 2000: Put the faxmodem
aside. Your computer should be turned on. Close any ap-
plications you have running. Then follow these steps.
1
Insert the CD-ROM disc that came with your fax-
modem into your CD-ROM drive. The CD-ROM disc
should auto-run after a few seconds and display an
installation screen.
If the CD does not auto-run:
• Click on My Computer on your desktop; then
double-click on the icon for your CD-ROM drive.
• If the installation program doesn’t start up right
away, double-click on setup.exe.
2
When the installation screen appears, click the
Install Drivers button. The installation program will
run and automatically copy driver files to your hard
drive. Click Finish. Do not install any of the other
software at this time.
3
For Windows 95, 98, and 2000: Follow the
instructions for Installing the Faxmodem Card on
page 8.
For Windows NT 4.0: Install the modem first according
to the instructions beginning on page 8. Then follow
these steps:
1
Insert the CD-ROM disc that came with your fax-
modem into your CD-ROM drive. The CD-ROM disc
should auto-run after a few seconds and display an
installation screen.
If the CD does not auto-run:
• Click on My Computer on your desktop; then
double-click on the icon for your CD-ROM drive.
• If the installation program doesn’t start up right
away, double-click on setup.exe.
To Next Page
Loading...