14
L510010-03
C.C.
ENGINE IDENTIFICATION - 3
PCM
2003 MODEL IDENTIFICATION / ADVISORY
MODEL P X L A P R R 123 M SERIAL 430000
8
th
9
th
10
th
Spaces: DRIVE GEAR RATIO OR REDUCTION
The drive gear ratio will appear in these spaces
which identifi es the production gear specs. The
example gear number shown is a (1.23:1). If
the gear being identifi ed does not have 3 digits,
a “0” will appear in 10
th
space.
Example: ( 1.0:1 ) will appear as 100
( 1.5:1 ) will appear as 150
*MODELS ENDING WITH “000000” IN
PLACE OF DRIVE I.D. ARE BOBTAIL ENGINES.
11
th
Space: IGNITION / FUEL TYPE USED
D - DISTRIBUTOR (Carb)
E - THROTTLE BODY INJECTION
M - MULTI-PORT FUEL INJECTION
*SERIAL NUMBER I.D.*
1
st
DIGIT INDICATES DECADE ENGINE WAS
MANUFACTURED ( 3 = 1990, 4 = 2000, 5 = 2010 )
2
nd
DIGIT INDICATES YEAR ENGINE WAS
MANUFACTURED.
1
st
Space: MANUFACTURER
P - Pleasurecraft Marine
2
nd
Space: FACTORY FRESHWATER / CLOSED COOLING
X-Freshwater Cooled
(Space Omitted If Raw Water Cooled )
3
rd
Space: ENGINE ROTATION
L - Rotation, Left-Hand from Rear
R - Rotation, Right-Hand from Rear
4
th
Space: ENGINE TYPE
A = 5.7L (350 CID HO) (GM)
Q = 6.0L (364 CID) (GM)
G = 5.0L (305 CID STD) (GM)
X = 8.1L (496 CID STD) (GM)
Z = 8.1L (496 CID HO) (GM)
5
th
Space: DRIVE MANUFACTURER
P - Pleasurecraft
W - Borg-Warner
V - Velvet Drive (cast iron units. Specify 71c or
72c)
H - Hurth
6
th
Space: DRIVE FUNCTION / APPLICATION
R - Reverse / Reduction
V - Vee Drive / Reversed Risers
F - Full Reversing
7
th
Space: PROPELLER SHAFT ROTATION
L - Left-Hand Rotation
R - Right-Hand Rotation
To Next Page
Loading...
Need help?
General
