EasyManuals Logo

PCM 2003 5.0L MPI User Manual

Default Icon
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
24
L510010-03
C.C.
25-HOUR ENGINE INSPECTION - 8
After the fi rst 25 hours of operation, it is recommended
that the engine be given an inspection. Your boat
dealer or a PCM servicing dealer should be contacted
to perform the necessary checks and adjustments to
ensure the proper engine performance. The following
maintenance should be performed:
Change the engine oil and fi lter.
Check and clean the primary fuel fi lter
Check the engine alignment.
Inspect the accessory drive belt(s) and check the
tension.
Check all the fl uid levels.
Check the throttle and the shift cable adjustments
and check for freedom of movement.
Cooling System - Inspect all the hoses for leaks,
damage and deterioration. Check all the hose
clamps for adequate tightness.
Exhaust System - Inspect the entire exhaust
system for leaks, damage and deterioration.
Check all the hose clamps for adequate
tightness.
Battery - Check the electrolyte level and specifi c
gravity. Inspect the case for damage. Check the
battery cables and connections.
Engine Assembly - Check for loose, missing or
damaged parts. Pay close attention to engine
mounts, starter and alternator mounting
fasteners.
NOTICE: PCM Engines assumes no responsibility for
the costs related to the 25-hour inspection. This is the
owner’s responsibility.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PCM 2003 5.0L MPI and is the answer not in the manual?

PCM 2003 5.0L MPI Specifications

General IconGeneral
BrandPCM
Model2003 5.0L MPI
CategoryEngine
LanguageEnglish

Related product manuals