PDK PDR1000 - Baud Rate

4.2.4 Baud Rate
Figure 6. Baud Rate setup flowchart
This function can set Baud Rate for RS232 Communication.
display shows current adjusted pressure value. Full Scale adjustment should be adjusted within
±10% of full scale value and displayed full scale value adjust with Pressure controller/calibrator
or Piston gauge.
Push PEAK/MENU key for 2 seconds to select Menu function. Push again PEAK/MENU key to
select Baud Rate function then push ZERO key to choose Baud Rate.
39
psi
%
g
0
REM
%
0
psi g
psi
%
g
0
psi
%
g
0
REM
psi
%
g
0
REM
PEAK
MENU
ZERO
psi
%
g
0
REM
psi
%
g
0
REM
psi
%
g
0
REM
psi
%
g
0
REM