• Press the SET button to select the third digit (0.01
cash per unit kWh).
• Press the ▲ key to change this value (e.g.: 5 -at a
rate of 00.25 € per kWh)
• Press the SET button to set the decimal point
change.
• Press the ▲ key to change the decimal point (in €
not necessary)
• Press the SET button for the appropriate day of the
week for Price 1 change.
• Repeatedly press the ▲ button to cycle through the
weekdays (normal value: Mo-Su) (Mo, Tu, We, Th,
Fri, Sat, Sun, Mon-Fri, Mon-Sat, Sat-Su, Mo-Su)
• Press the SET button to set the daily hour of the
start time for Price 1.
• Press the ▲ key to set the hour (e.g.: 6 - at begin of
Price 1 at 6 AM)
• Press the SET button to the minute of the start time
for Price 1 set.
• Press the ▲ key to set the minute (e.g.: 00 – at
begin of Price 1 at 6 AM)
• Press the SET button to save the settings.
6.2. Price 2 set:
• Press the MODE button for about 5 seconds in the
voltage measurement, current measurement and
power measurement menu to activate the tariff
preferences.
-30-
To Next Page
Loading...
Need help?
General
