16
CS
®
800x4
Power Amplifier
SPECIFICATIONS
CS 800x4
Rated Power 4 ohms bridged
825 watts @ 1 kHz <0.025% THD
Rated Power 4 x 2 ohms
400 watts per channel @ 1 kHz <0.025% THD four channels driven
Rated Power 4 x 4 ohms
300 watts per channel @ 1 kHz <0.02% THD four channels driven
Rated Power 4 x 8 ohms
180 watts per channel @ 1 kHz <0.02% THD four channels driven
Rated Power 1 x 2 ohms
500 watts @ 1 kHz at <0.02% THD
Rated Power 1 x 4 ohms
350 watts @ 1 kHz at <0.015% THD
Rated Power 1 x 8 ohms
200 watts @ 1 kHz at <0.006% THD
Minimum Load Impedance
2 ohms
Maximum RMS Voltage Swing
45 volts
Frequency Response
10 Hz - 20 kHz; +0, -1 dB at 1 watt
Power Bandwidth
10 Hz - 50 kHz; +0, -3 dB at rated 2 ohms power
T.H.D. 4 x 2 ohms
<0.20% @ 325 W per channel from 20 Hz to 20 kHz
T.H.D. 4 x 4 ohms
<0.10% @ 250 W per channel from 20 Hz to 20 kHz
T.H.D. 4 x 8 ohms
<0.10% @ 160 W per channel from 20 Hz to 20 kHz
SMPTE IMD
<0.1% 60 Hz and 7 kHz, 250 W @ 4 ohms
Slew Rate
7 V/us
Damping Factor (8 ohms)
> 400:1 @ 20 Hz - 400 Hz
Input CMRR
> -93 dB @ 1 kHz
Voltage Gain
x 40 (32 dB)
Input Sensitivity
0.720 V @ 2 ohms, 0.865 V @ 4 ohms, 0.940 V @ 8 ohms
Input Impedance
15k ohms, balanced
Hum and Noise
> -108 dB, “A” weighted referenced to rated 4 ohms power
To Next Page
Loading...
Need help?
General
