Rear Panel cont.
26
25
24
27
28
29
30
31
32
XLR DIRECT OUTPUT
is XLR output allows the signal from the mini MEGA to be connected directly to a mixing console.
TRS BALANCED OUTPUT
Another output option for the miniMEGA is the TRS output connection. A 1/4" balanced TRS cable can be con-
nected directly into a rack-mount FX processor or outboard recording device.
PRE/POST SELECTOR BUTTON
is button allows you to select two funtions for the Direct Interface. In the up position, the button is in the Pre
mode. In this position, the bass signal bypasses the EQ and processing of the amplier and travels directly to the
rack-mount FX processor or recording device. When the button is depressed, the amp is in Post; the signal goes
through the miniMEGA's preamp and processors before traveling to the rack-mount FX processor or recording
device.
PAD BUTTON
e PAD button helps prevent the signal from clipping at the soundboard or recorder, by reducing the amount of
signal level sent from the amplier. Press this button if the signal to the soundboard is clipping.
GROUND LIFT BUTTON
In the case of humming noises coming from the Direct Interface, this button can be pressed in order to remove
the ground loop.
EFFECTS LOOP SEND
1/4” output jack for supplying signals to external low-level eects or signal processing equipment.
EFFECTS LOOP RETURN
1/4” input for returning signals from external low-level eects or signal processing equipment. is is a switching
jack. Inserting a plug into this jack will break the signal path until it is returned via the EFFECTS LOOP SEND
jack. e Eects Loop is footswitchable, but the eects loop may be bypassed without the footswitch. First, hold
down the CRUNCH button, and then press the HI MID NARROW Q enable button.
TUNER OUTPUT
A 1/4" instrument cable can be run from the tuner jack into a tuner. Even when the Mute Button (17) is engaged,
the instrument signal will continue to run into the external tuner.
MIDI FOOTSWITCH JACK
e optional footswitch (part number_________) plugs into this jack. e footswitch controls Crunch, Com-
pressor, Kosmos, FX Loop, and Mute functions.