Peavey PV 2000 User Manual

- DDT Compression
should be enabled
for speaker protection
Left Output
from Mixer
Right Output
from Mixer
_ Mode Switch
must be in
Stereo Position
System Load
BRIDGE MODE
4 OHM Minimum Speakers
DDT Compression
should be enabled
for speaker protection
Output from
Mixer
Optional Filter:
Depress to
eliminate Low -
Frequency rumble
Channel B is
disabled - do not use
Mode Switch:
Must be depressed
to Bridge Position
A
WARNING!
A
AVIS!
For optimum performance and rehabdlty DO NOT PRESENT
THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN
2 OHMS, ORACOMBINATION OF SPEAKERS THAT
TOGETHER ARE LESS THAN 2 OHMS!
Pour assurer la Fiabilte et obtenit une performance optlmale, ne
soumeoe,ama,s I’amphficateur a une charge &mpedance to~alr
mfeneure a 2 ohms, ni avec un H P. ni en combmalwn de\ H.P.
Using one speaker, II must be rated at 2 ohms minimum.
Using tmw speaker\, they must be rated each at 4 ohm\ mmimum.
Usmg three speakers, they mu\t be rated each at 8 ohms
mmirnum.
AVEC un H.P., II Faul unr charge d’unpedance minimum de 2 ohms.
AVEC dew H.P., il Faut pour chaoun une charge d’impedance
minmum de 4 ohms
AVEC trms H.P., II Faut pour chaoun une charge d’unpedance
minimum de 8 ohm\.
9

Peavey PV 2000 Specifications

General

Brand	Peavey
Model	PV 2000
Category	Amplifier
Language	English